PENGENDALIAN KUALITAS ATRIBUT KEMASAN MENGGUNAKAN METODE FAILURE MODE EFFECT ANALYSIS (FMEA)PADA PROSES PRODUKSI AIR MINUM DALAM KEMASAN

  • Ni Wayan Anik Satria Dewi JURUSAN TEKNOLOGI INDUSTRI PERTANIAN FAKULTAS TEKNOLOGI PERTANIAN UNIVERSITAS UDAYANA
  • Sri Mulyani JURUSAN TEKNOLOGI INDUSTRI PERTANIAN FAKULTAS TEKNOLOGI PERTANIAN UNIVERSITAS UDAYANA
  • I Wayan Arnata JURUSAN TEKNOLOGI INDUSTRI PERTANIAN FAKULTAS TEKNOLOGI PERTANIAN UNIVERSITAS UDAYANA

Abstract

The purpose of study: 1. determine the types of defects in the product packaging plastic cups
240 ml, 2. determine the factors that cause defectsin the product, 3. formulated alternative
improvements to reduce the defect rate of the product. Research carried out by carrying out
preliminary studies and literature, collection of data and then processed and analyzed. Data
processing is done using: histogram, p-chart, fishbone diagram and Method Failure Mode Effect
Analysis (FMEA). The data are analyzed to derive the value of the Risk Priority Number (RPN) to
provide the highest proposed improvement alternative. The results showed that the types of defects
are: leaking cup defects, dents glass defects, labeling defect, amount of volume defect and defect
content of the product and disability amount to an  average of product defects 3.53% of the total
production per month. Factors that cause disabilityif sorted by degree are: human, packaging
materials, environment, methods, and machinery. Once the causes of defects is controlled decrease
the number of defects with an average value of 2.4%of total production per month.
Recommendations for improvement are given is to control all the processes in the packaging
division, especially the checking process, because  the checking process has the highest RPN value
with a value of 576



Keywords: Quality, Defect, Statistical Quality Control, FMEA

Downloads

Download data is not yet available.
How to Cite
ANIK SATRIA DEWI, Ni Wayan; MULYANI, Sri; ARNATA, I Wayan. PENGENDALIAN KUALITAS ATRIBUT KEMASAN MENGGUNAKAN METODE FAILURE MODE EFFECT ANALYSIS (FMEA)PADA PROSES PRODUKSI AIR MINUM DALAM KEMASAN. JURNAL REKAYASA DAN MANAJEMEN AGROINDUSTRI, [S.l.], v. 4, n. 3, p. 149 – 160, dec. 2016. ISSN 2503-488X. Available at: <https://ojs.unud.ac.id/index.php/jtip/article/view/25616>. Date accessed: 25 june 2021.
Section
Articles

Keywords

114;

Most read articles by the same author(s)

1 2 3 4 > >>