PENGARUH VARIASI UKURAN BUTIR PASIR CETAK TERHADAP KEKUATAN IMPACT DAN MORFOLOGI PATAHAN HASIL CORAN KUNINGAN PADA PENGECORAN EVAPORATIVE

  • Putu Nanta Pasek Eka Putra
  • I Ketut Gede Sugita
  • Cok Istri Putri Kusuma Kencanawati

Abstrak

Abstractt
Brass is a combination of copper (cu) and zinc (zn), one of the way the brass works with casting, the evaporative
casting method is casting polystyrene foam as a immersed pattern of the sand cast, the casting method has a
superior degree of precision. In order to increase the power of the brass yield, the study is conducted on a
variation in the size of the sand on the power impact and morphology of the brass yield on the evaporative
foundry.The study conducted a brass casting process with evaporative casting methods by casting temperature
with a release of 900 concentrated casting done by varying the size of silica 0.250; 0.315; 0.500 mm. The test
impact obtained the highest impact value on a specimen measuring 0.250mm of sand grains that had an average
of 0.26nm /mm mm mm. Whereas the value of the lowest impact force was obtained on a specimen of 0.500mm
sand grains that had an average of 0.24nm /mm mm difference. Observations of macrostructure in a specimen
that measures 0.250mm of sand tend to have tight density. Whereas the size of the 0.500 grains of sand tends
to have a slight density, causing a very low value impact force to be mitigated by the size of the 0.250 grains
of sand. So the longer freezing of molten metal the more intense it gets..
Keywords: Evaporative Casting, Polystyrene Foam, Impack Testing, Macro Structure

##plugins.generic.usageStats.downloads##

##plugins.generic.usageStats.noStats##
Diterbitkan
2023-10-01
##submission.howToCite##
PASEK EKA PUTRA, Putu Nanta; SUGITA, I Ketut Gede; KENCANAWATI, Cok Istri Putri Kusuma. PENGARUH VARIASI UKURAN BUTIR PASIR CETAK TERHADAP KEKUATAN IMPACT DAN MORFOLOGI PATAHAN HASIL CORAN KUNINGAN PADA PENGECORAN EVAPORATIVE. Teknik Desain Mekanika, [S.l.], v. 12, n. 4, oct. 2023. ISSN 2302-5182. Tersedia pada: <https://ojs.unud.ac.id/index.php/mekanika/article/view/113386>. Tanggal Akses: 17 june 2024

##plugins.generic.recommendByAuthor.heading##

<< < 1 2 3 4 > >>