Sistem Pemantauan Kekeruhan dan Suhu Air pada Akuarium Ikan Hias Air Tawar Berbasis IoT (Internet of Things)
Abstract
The aquarium monitoring system in the maintenance of ornamental fish is fundamental to maintaining the survival of the aquatic biota in it. In this study, a prototype of a water condition monitoring system such as turbidity and water temperature in freshwater ornamental fish aquariums was designed and integrated with IoT technology so that it could make it easier for ornamental fish owners to maintain freshwater ornamental fish remotely. In the prototype tool, there is a turbidity sensor SEN0189, a temperature sensor DS18B20, and an HC-SR04 sensor, which function to measure changes that occur in each parameter. Each sensor data will be processed by the Arduino Uno microcontroller, which is then sent to the NodeMCU ESP8266 (Wi-Fi module) via serial communication so that sensor data readings can be displayed on the Blynk application. As a result of the tests, the system can monitor the turbidity of the water and drain the water if the turbidity reaches >= 25 NTU and refill the aquarium with clean water. In addition, the system can also monitor and control the water temperature in the aquarium. The aquarium water temperature level is maintained in the range of 24°C – 28°C.
Downloads
References
[2] Kharisma dan Suryadi, “Rancang Bangun Alat Monitoring dan Penanganan Kualitas Air pada Akuarium Ikan Hias Berbasis Internet of Things (IoT)”, Jurnal Teknik Elektro dan Komputer TRIAC, vol. 7, 2020.
[3] S. Indriyanto, F. T. Syifa, dan H. A. Permana, “Sistem Monitoring Suhu Air pada Kolam Benih Ikan Koi Berbasis Internet of Things”, TELKA, vol. 6, pp.10-19, 2020.
[4] I. G. H. Putrawan, P. Rahardjo, dan I. G. A. P. Raka Agung, “Sistem Monitoring Tingkat Kekeruhan air dan Pemberi Pakan Otomatis pada Kolam Budidaya Ikan Koi Berbasis NodeMCU”, Majalah Ilmiah Teknologi Elektro, vol. 19(1), pp. 1-10, 2019.
[5] Nandy, 2021. Panduan Budidaya Ikan Guppy & Jenis Ikan Guppy. [Online]. Tersedia pada: https://www.gramedia.com/best-seller/budidaya-ikan-guppy/
[6] M. Kautsar, R. R. Isnanto, dan E. D. Widianto,” Sistem Monitoring Digital Penggunaan dan Kualitas Kekeruhan Air PDAM Berbasis Mikrokontroler ATMega328 Menggunakan Sensor Aliran Air dan Sensor Fotodiode”, Jurnal Teknologi dan Sistem Komputer, vol. 3, no. 1, pp.79-86, 2015.
[7] M. S. Ramadhan, “Sistem Kontrol Tingkat Kekeruhan pada Aquarium Menggunakan Arduino Uno”, Skripsi, Fakultas Teknologi Elektro, Institut Teknologi Sepuluh Nopember, Surabaya. 2018.
[8] B. S. Kusumaraga, S. Syahrorini, D. Hadidjaja, dan I. Anshory, " Monitoring Kualitas Air Akuarium Berbasis Internet of Things", Seminar Nasional & Call Paper Fakultas Sains dan Teknologi (SENASAINS), vol. 1, no. 2, 2021.
[9] E. Prasetyo, 2021. Turbidity Sensor (Kekeruhan Air) SEN0189. [Online]. Tersedia pada: https://www.edukasielektronika.com/2020/11/turbidity-sensor-kekeruhan-air-sen0189.html
[10] R. A. Wadu, Y. S. B. Ada, dan I. U. Panggalo, "Rancang Bangun Sistem Sirkulasi Air pada Akuarium/Bak Ikan Air Tawar Berdasarkan Kekeruhan Air Secara Otomatis", Jurnal Ilmiah FLASH, vol. 3, no. 1, 2017.
[11] A. Rofiq, “Desain Sistem Monitoring Suhu Menggunakan Sensor DS18B20”, Skripsi, Program Studi Teknik Elektro, Universitas Indonesia. 2010.
[12] F. Puspasari, I. Fahrurrozi, T. P. Satya, dan G. Setyawan, “Sensor Ultrasonik HC-SR04 Berbasis Arduino Due untuk Sistem Monitoring Ketinggian”, Jurnal Fisika dan Aplikasinya, vol. 15 no. 2, 2019.
[13] A. A. Endryanto, “Kontrol dan Monitoring Tanaman Hidroponik Sistem Nutrien Film Technique Berbasis IoT”, Skripsi, Program Studi Informatika, Universitas 17 Agustus 1945 Surabaya. 2020.
[14] P. Rahardjo, "Sistem Penyiraman Otomatis Menggunakan Sensor Kelembaban Tanah Berbasis Mikrokontroler Arduino Mega 2560 pada Tanaman Mangga Harum Manis Buleleng Bali", Majalah Ilmiah Teknologi Elektro, vol. 21, no. 1, 2022.
[15] (2018) The Arduino Website. [Online]. Tersedia pada: https://www.arduino.cc/en/Main/arduinoBoardUno>
[16] K. B. Anjasmara, Y. Divayana, dan P. Rahardjo, "Rancang Bangun Alat Monitoring Switch pada PDG (Pressure Different Gauge) Berbasis SMS dengan Microcontroller Arduino", Majalah Ilmiah Teknologi Elektro, vol. 19, no. 1, 2020.
[17] H. D. Septama, T. Yulianti, W. E. Sulistyono, A. Yudamson, dan R. S. T. Atmojo, “Smart Warehouse: Sistem Pemantauan dan Kontrol Otomatis Suhu serta Kelembaban Gudang”, Seminar Nasional Inovasi, Teknologi dan Aplikasi (SeNITiA), pp.189-192, 2018.
[18] Y. Efendi, “Internet of Things (IoT) Sistem Pengendalian Lampu Menggunakan Raspberry Pi Berbasis Mobile”, Jurnal Ilmiah Ilmu Komputer, vol. 4, no. 1, 2018.
[19] A. Kurniawan, “Sistem Pengendali Peralatan Rumah Tangga Berbasis Aplikasi Blynk dan NodeMCU ESP8266”, Skripsi, Sekolah Tinggi Manajemen Informatika dan Komputer, Akakom Yogyakarta. 2017.
[20] F. Supegina dan E. J. Setiawan, "Rancang Bangun IoT Temperature Controller untuk Enclosure BTS Berbasis Microcontroller Wemos dan Android", Jurnal Teknologi Elektro, vol. 8, no. 2, 2017.
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
This work is licensed under a Creative Commons Attribution 4.0 International License
