Aplikasi medan magnet pada saluran bahan bakar sepeda motor

I Made Mara; I Made Nuarsa

doi:10.24843/JEM.2021.v14.i02.p02

I Made Mara Universitas Mataram
I Made Nuarsa Universitas Mataram

DOI: https://doi.org/10.24843/JEM.2021.v14.i02.p02

Abstract

Reducing fuel consumption and improving fuel quality in motorcycle engines are very important in order to make the exhaust gas emission from the engine becomes more environmentally friendly. In this study, a magnetic field is attached to the fuel line so that the fuel is affected by the magnetic field. The magnetic field is obtained from electromagnetic magnets and permanent magnets. Fuel consumption is tested on a motorcycle engine that it uses a carburetor system and on an engine that uses a fuel injection system. The exhaust emissions observed were CO and HC by using exhaust gas analyzer. The results showed that the use of a magnetic field mounted on the fuel line can reduce the fuel consumption of a motorcycle engine, using either a carborator system or a fuel injection system by an average of 18%. The use of magnetic fields also shows a very good effect in reducing exhaust gas emissions from motorcycle engines. The length of the magnet attached to the fuel line, 80mm provides a reduction in exhaust gas emissions of CO by 80% - 90% and HC by 60% - 77%. The percentage reduction in exhause gas emission is better than the other length of magnets.

Downloads

Download data is not yet available.

References

[1] I. M. Mara, I. B. Alit, and I. M. Nuarsa, Penurunan Konsumsi Bahan Bakar pada Mesin Bensin 4 Langkah 1 Silinder Dengan Menggunakan Medan Magnet Elektomagnetik, Din. Tek. Mesin, vol. 11, no. 1, p. 49, 2021, doi: 10.29303/dtm.v11i1.374.

[2] R. Guerrero Torres and M. Mehrvar, An Experimental Evidence of Gasoline Ionization by a Magnetic Field, Proc. 2nd Int. Conf. Recent Trends Environ. Sci. Eng., no. 144, pp. 1–8, 2018, doi: 10.11159/rtese18.144.

[3] A. S. Faris et al., Effects of magnetic field on fuel consumption and exhaust emissions in two-stroke engine, Energy Procedia, vol. 18, pp. 327–338, 2012, doi: 10.1016/j.egypro.2012.05.044.

[4] I. M. Mara, I. W. Joniarta, I. B. Alit, I. M. A. Sayoga, and M. Nuarsa, Analisis Penggunaan Alat Magnetisasi Bahan Bakar Secara Elektromagnetik Terhadap Unjuk Kerja Mesin Empat Langkah Satu Silinder, Din. Tek. Mesin, vol. 8, no. 2, pp. 98–103, 2018, doi: 10.29303/dtm.v8i2.233.

[5] F. A. El Fatih and G. M. Saber, Effect Of Fuel Magnetism on Engine Performance And Emissions, Aust. J. Basic Appl. Sci., vol. 4, no. 12, pp. 6354–6358, 2010.

[6] N. Fuhaid, M. A. Sahbana, and A. Arianto, Pengaruh Medan Elektromagnet Terhadap Konsumsi Bahan Bakar dan Emisi Gas Buang pada Motor Bensin, Proton, vol. 3, no. 1, pp. 1–9, 2011.

[7] V. Ugare, S. Dhoble, S. Lutade, and K. Mudafale, Performance of Internal Combustion (CI) Engine Under The Influence of Stong Permanent Magnetic Field, J. Mech. Civ. Eng., vol. 2014, no. Ci, pp. 11–17, 2014.

[8] C. Y. Chen, W. J. Lee, J. K. Mwangi, L. C. Wang, and J. H. Lu, Impact of Magnetic Tube on Pollutant Emissions from The Diesel Engine, Aerosol Air Qual. Res., vol. 17, no. 4, pp. 1097–1104, 2017, doi: 10.4209/aaqr.2016.11.0478.

[9] P. V. Kumar, S. K. Patro, and V. Pudi, Experimental Study of A Novel Magnetic Fuel Ionization Method in Four Stroke Diesel Engines, Int. J. Mech Eng. Rob. Res., vol. 3, no. 1, pp. 151–159, 2014.

[10] P. Sathiamurthi, K. S. Karthi Vinith, and A. Sivakumar, Performance And Emission Test in CI Engine Using Magnetic Fuel Conditioning with Nano Additives, Int. J. Recent Technol. Eng., vol. 8, no. 3, pp. 7823–7826, 2019, doi: 10.35940/ijrte.C6213.098319.

[11] D. R. Mane and V. S. Sawant, A Comparative Study of Effect of Magnetic Field on Exhaust Emission In Internal Combustion Engine, IOSR J. Appl. Phys., Vol. 7, No. 6, Pp. 38–40, 2015, Doi: 10.9790/4861-07623840.

[12] S. Chavan And P. Jhavar, Effects f Application Of Magnetic Field On Efficiency Of Petrol Engine., Int. Res. J. Eng. Technol., Vol. 03, No. 09, Pp. 152–161, 2016.

[13] R. A. Tamol, Sr., And VA, Method and Apparatus To Increase Combustion Efficiency and To Reduce Exhaust Gas Pollutants from Combustion of A Fuel, Vol. 1, No. 12, P. Vol 1, Nos. 12, 2005, 2005.