ANALISA PENGARUH KEMIRINGAN HEAD DAN VARIASI SUDUT BLADE TURBIN ULIR TERHADAP KINERJA PLTMH

Main Article Content

I Putu Wahyu Indra Wedanta Wayan Arta Wijaya Lie Jasa

Abstract

Bali has many waterfalls which can be used as Micro Hydro Power Plant (MHPP). It
uses 2 types of turbines, one of them is screw turbine or Archimedes screw. Screw turbine is
still rare, therefore a MHPP modeling needs to be made to obtain specific data. This study will
discuss the analysis of the influence of the Head Slope and the Variation of the Angle of the
Blade of Turbine to Performance of the MHPP, to determine the torque, turbine rotation,
voltage, current, power and rotation produced by the generator. Best measurement results on
the slope of the head 400 and variations in blade angle 280. Voltage, current and power
obtained by 73.8 V, 148.9 A and 10.98882 W. At the turbine speed before coupling, the
generator is obtained 596 rpm and 304 rpm after coupling, while the generator rotation is 3863
rpm. The resulting torque and efficiency are 0.3492 Nm and 14.16%.

Downloads

Download data is not yet available.

Article Details

How to Cite
WAHYU INDRA WEDANTA, I Putu; ARTA WIJAYA, Wayan; JASA, Lie. ANALISA PENGARUH KEMIRINGAN HEAD DAN VARIASI SUDUT BLADE TURBIN ULIR TERHADAP KINERJA PLTMH. Jurnal SPEKTRUM, [S.l.], v. 8, n. 1, p. 73-84, mar. 2021. ISSN 2684-9186. Available at: <https://ojs.unud.ac.id/index.php/spektrum/article/view/71645>. Date accessed: 13 dec. 2024. doi: https://doi.org/10.24843/SPEKTRUM.2021.v08.i01.p9.
Section
Articles

Most read articles by the same author(s)

<< < 1 2 3 4 5 6 7 > >>