@article{TDM, author = {Putu Andika Pramana Putra dan I Ketut Gede Sugita dan Ni Made Dwidiani}, title = { Karakteristik Kekerasan Coran Material Al-7Si Akibat Variasi Temperatur Tuang Dan Tebal Saluran Pada Pengecoran Sand Casting}, journal = {Teknik Desain Mekanika}, volume = {13}, number = {4}, year = {2024}, keywords = {}, abstract = {AbstracttThe Al-Si alloy is a vital aluminum-based alloy due to its excellent casting characteristics, good weldability,high pressure tightness, and corrosion resistance. Al-7Si alloy is frequently used in the maritime, electrical,automotive, and aerospace industries, especially for components such as engine blocks and cylinder heads aswell as other machine body castings. The pouring temperature plays a crucial role in ensuring that the materialfills the mold perfectly and prevents defects such as porosity or gas bubbles. The thickness of the channel alsoaffects the filling speed of the mold and the cooling process of the liquid material. Optimal regulation of thesetwo parameters can influence the mechanical properties of the cast material. Therefore, the aim of this studyis to investigate the effect of casting temperature variation and channel thickness variation on the hardness ofAl-7Si material. This research involves the use of varying casting temperatures between 750°C, 850°C, and950°C, as well as channel thickness variations from 1.5 mm to 5 mm. The results show that the highest hardnessoccurs at a casting temperature of 750°C, while the lowest hardness occurs at a casting temperature of 950°C.Keywords: Al-7Si, pouring temperature, channel thickness, hardness.}, issn = {2302-5182}, url = {https://ojs.unud.ac.id/index.php/mekanika/article/view/123131} }