Rancang Bangun Modul Praktikum Programmable Logic Controller Berbasis Outseal PLC
Abstract
In this research, the design of PLC trainer tools and its accessories was carried out to support the making of practicum modules for Programmable Logic Controller + Lab courses by utilizing the Outseal PLC Mega V3 Standard PP board.
There are three experimental designs for the practicum module of the Programmable Logic Controller + Lab course, such as running light, water level control, and application of oil to the machine. In general, the design of this practicum module is divided into 3 stages, including system design, hardware design, and software design.
Keyword – PLC Trainer; Practicum; Outseal PLC Mega V3 Standard
Downloads
Download data is not yet available.
References
[1] Putri, dkk., “Rancang Bangun Sistem Kendali Level Air Berbasis Programmable Logic Controller dan Human Machine Interface.” KILAT, Volume X, pp. 272-279, 2021.
[2] Wawan, dkk., “Modul Praktikum Kendali Otomasi Industri Dasar Berbasis PLC Outseals”. ELIT (Electronics and Information Technology), Volume I, pp. 001-009, 2020.
[3] Amrollah, S. S., “Rancang Bangun Modul Trainer dan Traffic Light Simpang Empat Menggunakan PLC OMRON PC1E E30DR-A”. Jurnal Teknik Elektro UNESA, Volume X, pp. 443-451, 2021..
[4] Bakhtiar, A., Panduan Dasar Outseal Plc, 1st ed. s.l.:Teknologi Otomasi Karya Anak Bangsa 2020.
[5] Mustafa, S. et al., “Rancang Bangun Media Pembelajaran Trainer PLC.” Journal Of Electrical Engineering , Volume III, pp. 186-191, 2022.
[6] Safitri, A. M., “Rancang Bangun Trainer Dan Modul Variasi Input PLC Berbasis Arduino Menggunakan PLC Omron CP1E E30DR-A.” Jurnal Teknik Elektro, Volume X, pp. 413-423, 2021.
[7] Khuluqi, K., Perancangan dan Pembuatan Trainer-Kit Programmable Logic Controller (PLC) Untuk Media Pembelajaran Sistem Otomasi Industri, 2020.
[8] Hamid, F., Rancang Bangun Sistem Pengisian Air dan Penutupan Botol Berbasis Programmable Logic Controller, 2023.
[9] Wahidah, dkk., “Pengembangan Modul Trainer PLC Siemens S7 -1200 pada Kasus Sortir Station Berbasis Factory I/O” Prosiding Seminar Nasional Teknologi Industri, Volume I, E-ISSN 2964-1896, 2022.
[10] Indani, dkk., “Rancang Bangun Sistem Monitoring Prototype Mesin Packaging Berbasis PLC” Journal of Applied Smart Electrical Network and Systems (JASENS), Volume 3 No. 1, E-ISSN 2723-5467, 2022.
[11] Mugono, dkk., “Rancang Bangun Trainer Kendali Berbasis PLC Mitsubishi FX3U MR di Watussalam Textile” Jurnal Cahaya Bagaskara, Volume 6 No. 1, ISSN 2580-9083, 2021.
[12] Topan, dkk., “Desain Perangkat Praktikum Programmable Logic Controller (PLC) Berbasis Arduino Nano” Dielektrika, Volume 10 No. 2, p-ISSN 2086-9487, 2023.
[13] Yudha, dkk., “Rancang Bangun Water Level Control Berbasis Sonoff Smart Switch” Jurnal Elektronika Listrik dan Teknologi Informasi Terapan , Volume 7 No. 1, pp. 51-62, 2022.
[14] Lazuardi, dkk., “Rancang Bangun Trainer dan Sistem Otomasi Concrete Batching Plant Menggunakan PLC Omron CP1E E30DR-A” Jurnal Teknik Elektro , Volume 10 No. 3, ISSN 2252-5017, 2021.
[15] Wasono, dkk., “Rancang Bangun Kendali Lampu Penerangan di Laboratorium Kendali Prodi Listrik Dengan PLC” Prosiding Seminar Hasil Penelitian dan Pengabdian Masyarakat , Volume 4 No. 1, pp. 1328-1339, 2022.
[16] Violinda, dkk., “Rancang Bangun Sistem Parkir Menggunakan PLC Outseal Berbasis Internet Of Things” Voteteknika , Volume 10 No. 2, p-ISSN 2302-3295, 2022.
[17] Rizky, dkk “Modul Praktikum Pembelajaran Hidraulik Berbasis PLC.” Prosiding 13th Industrial Research Workshop and National Seminar (IRWNS), Vol.13 No.01, pp 2775-2003, 2022.
[18] Mungkin, Programmable Logic Controller, Cetakan Ke 1, ISBN: 978-623-5451-47-3, 2022.
[19] Amertha, dkk “Sistem Monitoring dan Kontrol Tangki Air Menggunakan Raspberry Pi Berbasis Bot Telegram” Majalah Ilmiah Teknologi Elektro, Vol. 21, No.2, 2022.
[20] Rahardjo Pratolo, “Sistem Penyiraman Otomatis Menggunakan Sensor Kelembaban Tanah Berbasis Mikrokontroler Arduino Mega 2560 Pada Tanaman Mangga Harum Manis Buleleng Bali” Majalah Ilmiah Teknologi Elektro, Vol.21, No.1, 2022.
[2] Wawan, dkk., “Modul Praktikum Kendali Otomasi Industri Dasar Berbasis PLC Outseals”. ELIT (Electronics and Information Technology), Volume I, pp. 001-009, 2020.
[3] Amrollah, S. S., “Rancang Bangun Modul Trainer dan Traffic Light Simpang Empat Menggunakan PLC OMRON PC1E E30DR-A”. Jurnal Teknik Elektro UNESA, Volume X, pp. 443-451, 2021..
[4] Bakhtiar, A., Panduan Dasar Outseal Plc, 1st ed. s.l.:Teknologi Otomasi Karya Anak Bangsa 2020.
[5] Mustafa, S. et al., “Rancang Bangun Media Pembelajaran Trainer PLC.” Journal Of Electrical Engineering , Volume III, pp. 186-191, 2022.
[6] Safitri, A. M., “Rancang Bangun Trainer Dan Modul Variasi Input PLC Berbasis Arduino Menggunakan PLC Omron CP1E E30DR-A.” Jurnal Teknik Elektro, Volume X, pp. 413-423, 2021.
[7] Khuluqi, K., Perancangan dan Pembuatan Trainer-Kit Programmable Logic Controller (PLC) Untuk Media Pembelajaran Sistem Otomasi Industri, 2020.
[8] Hamid, F., Rancang Bangun Sistem Pengisian Air dan Penutupan Botol Berbasis Programmable Logic Controller, 2023.
[9] Wahidah, dkk., “Pengembangan Modul Trainer PLC Siemens S7 -1200 pada Kasus Sortir Station Berbasis Factory I/O” Prosiding Seminar Nasional Teknologi Industri, Volume I, E-ISSN 2964-1896, 2022.
[10] Indani, dkk., “Rancang Bangun Sistem Monitoring Prototype Mesin Packaging Berbasis PLC” Journal of Applied Smart Electrical Network and Systems (JASENS), Volume 3 No. 1, E-ISSN 2723-5467, 2022.
[11] Mugono, dkk., “Rancang Bangun Trainer Kendali Berbasis PLC Mitsubishi FX3U MR di Watussalam Textile” Jurnal Cahaya Bagaskara, Volume 6 No. 1, ISSN 2580-9083, 2021.
[12] Topan, dkk., “Desain Perangkat Praktikum Programmable Logic Controller (PLC) Berbasis Arduino Nano” Dielektrika, Volume 10 No. 2, p-ISSN 2086-9487, 2023.
[13] Yudha, dkk., “Rancang Bangun Water Level Control Berbasis Sonoff Smart Switch” Jurnal Elektronika Listrik dan Teknologi Informasi Terapan , Volume 7 No. 1, pp. 51-62, 2022.
[14] Lazuardi, dkk., “Rancang Bangun Trainer dan Sistem Otomasi Concrete Batching Plant Menggunakan PLC Omron CP1E E30DR-A” Jurnal Teknik Elektro , Volume 10 No. 3, ISSN 2252-5017, 2021.
[15] Wasono, dkk., “Rancang Bangun Kendali Lampu Penerangan di Laboratorium Kendali Prodi Listrik Dengan PLC” Prosiding Seminar Hasil Penelitian dan Pengabdian Masyarakat , Volume 4 No. 1, pp. 1328-1339, 2022.
[16] Violinda, dkk., “Rancang Bangun Sistem Parkir Menggunakan PLC Outseal Berbasis Internet Of Things” Voteteknika , Volume 10 No. 2, p-ISSN 2302-3295, 2022.
[17] Rizky, dkk “Modul Praktikum Pembelajaran Hidraulik Berbasis PLC.” Prosiding 13th Industrial Research Workshop and National Seminar (IRWNS), Vol.13 No.01, pp 2775-2003, 2022.
[18] Mungkin, Programmable Logic Controller, Cetakan Ke 1, ISBN: 978-623-5451-47-3, 2022.
[19] Amertha, dkk “Sistem Monitoring dan Kontrol Tangki Air Menggunakan Raspberry Pi Berbasis Bot Telegram” Majalah Ilmiah Teknologi Elektro, Vol. 21, No.2, 2022.
[20] Rahardjo Pratolo, “Sistem Penyiraman Otomatis Menggunakan Sensor Kelembaban Tanah Berbasis Mikrokontroler Arduino Mega 2560 Pada Tanaman Mangga Harum Manis Buleleng Bali” Majalah Ilmiah Teknologi Elektro, Vol.21, No.1, 2022.
Published
2024-01-24
How to Cite
LANGIT, Sekar; RAHARDJO, Pratolo; NUGRAHA, I Putu Elba Duta.
Rancang Bangun Modul Praktikum Programmable Logic Controller Berbasis Outseal PLC.
Majalah Ilmiah Teknologi Elektro, [S.l.], v. 22, n. 2, p. 295-304, jan. 2024.
ISSN 2503-2372.
Available at: <https://ojs.unud.ac.id/index.php/jte/article/view/105617>. Date accessed: 27 apr. 2024.
doi: https://doi.org/10.24843/MITE.2023.v22i02.P18.
Section
Articles
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
This work is licensed under a Creative Commons Attribution 4.0 International License
