Eksperimental Pengaruh Variasi Sudut Ulir Pada Turbin Ulir (Archimedean Screw) Pusat Pembangkit Listrik Tenaga Mikro Hidro Dengan Head Rendah

  • Agus Trisna Saputra Udayana
  • Antonius Ibi Weking
  • I Wayan Artawijaya

Abstract

Indonesia has a lot of energy potential, both conventional (Non Renewable) and Renewable Energy. Energy potential that is mostly used for the Indonesian region still uses conventional energy (Non Renewable) in the form of fossil fuels (coal, natural gas and petroleum). At present, fossil energy use reaches 75% and will continue to increase. To avoid the use of fossil energy, studies are carried out on renewable energy (Non Renewable) for example Micro Hydro. The working principle of the Micro Hydro Power Plant use the potential energy of water which is converted into electrical energy. In this final project research has been made modeling of micro hydro power plants using screw turbines (Archimedean Screw) with tubrine blade angle variations ranging from 240, 260,280,300 and 320. The measurements made in this study include measurement of turbine rotation, generator rotation, voltage, current and torque generated in the modeling that has been made. From the measurements that have been made using a lamp load of 25 Watts the highest measurement results are obtained at an angle of 280. At an angle of 280 produces a power of 10.8 Watts, torque of 0.33 Nm and efficiency of 11.6%.

Downloads

Download data is not yet available.

References

[1] Setiarso, M.A. Widiyanto, W. Purnomo, S.N. 2016. Potensi Tenaga Listrik dan Penggunaan Turbin Ulir Untuk Pembangkit Skala Kecil di Saluran Irigasi Banjarcahyana. DINAMIKA REKAYASA Vol. 13 No. 1 (2016), Hal. 18-27.
[2] Havendi, A & Arnif, I., 2010. Kaji Eksperimental Penentuan Sudut Ulir Untuk Data Perencanaan Turbin Ulir Pada Pusat Listrik Tenaga Mikrohidro (PLTMH) Head Rendah.
[3] T, Syahputra, dkk., 2017. Rancang Bangun Prototipe Pikohidro dengan Menggunakan Turbin Ulir. Darusalam, Bnada Aceh
[4] Kementrin Sumber Daya Alam dan Mineral. Pedoman Pengusaha Pembangkti Listrik Tenaga Mikro Hidro Skala Kecil. ( diaskes 15 September 2018)
[5] Nugroho, Y.S.H., 2015. Panduan Lengkap Membuat Sumber Energi Terbarukan Secara Swadya Edisi 1. CV. ANDI OFFSET, Yogyakarta
[6] Damastuti Anya, P., 1997. Pembangkit Listrik Tenaga Mikro Hidro. Wacana No. 8/Mei – juni 1997.
[7] Susatyo, A., 2003. Perancangan Turbin Pelton. Pusat Penelitian Informatika – LIPI, Bandung
[8] Rorres, C., 2000. The turn Of The Screw: Optimal Design Of an Archimedeam Screw.
[9] Sihombing, E. S., 2009. Pengujian Sudu Lengkap Prototipe Turbin Air Terapung Pada Aliran Sungai. Universitas Sumatera, Medan.
[10] Bahri, A. Jasa, L. Sudarmojo, Y.P. 2017. “Merancang dan Mengimplementasi Modul Praktikum Pembangkit Listrik Tenaga Mikro Hidro di Jurusan Teknik Elektro dan Komputer Universitas Udayana”. Majalah Ilmiah Teknologi Elektro. Vol. 16, No. 02, Mei - Agustus 2017.
[11] Saputra, I.W.B. Weking, A.I, Jasa, L. 2017. "Rancang Bangun Pemodelan Pembangkit Listrik Tenaga Mikro Hidro (PLTMH) Menggunakan Kincir Overshot Wheel”. Majalah Ilmiah Teknologi Elektro. Vol. 16, No. 02, Mei-Agustus 2017.
[12] Tohari, M. 2015. Pengujian Unjuk Kerja Turbin Crossflow Skala Laboratorium dengan Jumlah Sudu 20. Sekolah Tinggi Teknik Harapan.
[13] Sihaloho, D.L. 2017. ”Rancang Bangun Alat Uji Model Sistem Pembangkit Listrik Tenaga Mikro Hidro (PLTMH) Menggunakan Turbin Aliran Silang”. Bandar Lampung : Universitas Lampung.
Published
2019-05-06
How to Cite
SAPUTRA, Agus Trisna; WEKING, Antonius Ibi; ARTAWIJAYA, I Wayan. Eksperimental Pengaruh Variasi Sudut Ulir Pada Turbin Ulir (Archimedean Screw) Pusat Pembangkit Listrik Tenaga Mikro Hidro Dengan Head Rendah. Majalah Ilmiah Teknologi Elektro, [S.l.], v. 18, n. 1, p. 83-90, may 2019. ISSN 2503-2372. Available at: <https://ojs.unud.ac.id/index.php/JTE/article/view/45313>. Date accessed: 03 june 2020. doi: https://doi.org/10.24843/MITE.2019.v18i01.P12.