Sistem Komunikasi Modul Sensor Jamak Berbasiskan Mikrokontroler Menggunakan Serial Rs-485 Mode Multi Processor Communication (Mpc)

  • Suar wibawa Jurusan Teknologi Informasi, Fakultas Teknik, Universitas Udayana
  • A. A. K. Oka Sudana Jurusan Teknologi Informasi, Fakultas Teknik, Universitas Udayana
  • Putu Wira Buana Jurusan Teknologi Informasi, Fakultas Teknik, Universitas Udayana
DOI: https://doi.org/10.24843/LKJITI.2016.v07.i02.p06

Abstract

Multi-sensor communication system uses RS-485 standard communication connecting each microcontroller-based data processing unit to form BUS topology network. The advantages of this  communication system  are:  connectivity  (easy  to  connecting  devices  on  a  network), scalability (flexibility to expand the network), more resistant to noise, and easier maintenance. The System is built using Master-Slave communication approach model. This system need to filter every data packet on communication channel because every device that connect in this network can hear every data packet across this network. Multi Processor Communication (MPC) model is applied to reduce processor’s burden in inspecting every data packet, so the processor that work in slave side only need to inspect the message for itself without inspecting every data packet across the communication chanel.

Downloads

Download data is not yet available.

References

[1] T. P. M. Lock et al., “8-bit Microcontroller with 8K Bytes In-System Programmable Flash/ AT89S52,” 2008.
[2] Atmel, “Atmel 8-Bit Microcontroller With 4/8/16/32Kbytes in-System Programmable Flash,” 2014.
[3] G. P. S. E. Board, “GPS Engine Board SPECIFICATION.”
[4] D. Hanto and B. Widiyatmoko, “Sistem Komunikasi Sensor Jamak Dengan Serial Rs 485,” in Seminar Nasional Fisika 2012, 2011, pp. 187–195.
[5] Maxim, “RELIABILITY REPORT FOR MAX3082CPA+ PLASTIC ENCAPSULATED DEVICES,” 2010.
[6] Maxim, “Low-Power, Slew-Rate-Limited RS-485/RS-422 Transceivers,” 2003.
[7] A. Salam, Mukhidin, and T. Sucita, “Rancang Bangun Sistem Jaringan Multidrop Menggunakan RS-485 Pada Aplikasi Pengontrolan Alat Penerangan Kamar hotel,” ELECTRANS, 2015.
[8] A. Tiyono, Sudjadi, and Setiawan, “Sistem Telekontrol SCADA Dengan Fungsi Dasar,” Diponegoro University, 2011.
Published
2016-08-01
How to Cite
WIBAWA, Suar; SUDANA, A. A. K. Oka; BUANA, Putu Wira. Sistem Komunikasi Modul Sensor Jamak Berbasiskan Mikrokontroler Menggunakan Serial Rs-485 Mode Multi Processor Communication (Mpc). Lontar Komputer : Jurnal Ilmiah Teknologi Informasi, [S.l.], p. 122-131, aug. 2016. ISSN 2541-5832. Available at: <https://ojs.unud.ac.id/index.php/lontar/article/view/23073>. Date accessed: 25 apr. 2024. doi: https://doi.org/10.24843/LKJITI.2016.v07.i02.p06.
Citation Formats
Issue
Vol. 7, No. 2 Agustus 2016
Section
Articles

Keywords

Multi Processor Communication (MPC); Monitoring system; RS-485

The Authors submitting a manuscript do so on the understanding that if accepted for publication, the copyright of the article shall be assigned to Jurnal Lontar Komputer as the publisher of the journal. Copyright encompasses exclusive rights to reproduce and deliver the article in all forms and media, as well as translations. The reproduction of any part of this journal (printed or online) will be allowed only with written permission from Jurnal Lontar Komputer. The Editorial Board of Jurnal Lontar Komputer makes every effort to ensure that no wrong or misleading data, opinions, or statements be published in the journal.

Creative Commons License This work is licensed under a Creative Commons Attribution 4.0 International License.

Most read articles by the same author(s)